Lonsdor k518ise

2018年5月31日星期四

How to update Lonsdor K518ise KPROG-2 adapter kernel

Upgrade process for Lonsdor K518ise KPROG-2 adapter kernel:
After the APK of lonsdor K518ise device is upgraded to V1. 6.0 version, the adapter requires to
be installed new kernel beforehand. Please refer to below operations
Step 1: Connect the device to the specified adapter and plug in 12V power, as shown
below

Step 2: Start up the device, and input password to enter home screen. Click"Update
firmware "button in below red box

Step 3: The following interface appears, click"Install Adapter"in below red box.

Step 4: It skips to the below interface, click"OK" to continue.

Steo 5: It skips to below interface. You will see the progress indicator moving
rightwards. When downloading is completed, click OK"and exit. The adapter kernel
is installed successfully.

Part1: How to Bind Lonsdor K518ISE KPROG Adapter
The Lonsdor K518ISE KPROG adapter is specialized for part of Volvo car series and the new Maserati
for the time being, the more car models supported will keep updating.  And the KPROG adapter must be bound to K518ISE before using, So how to blind K518ise KPROG adapter? Please follow the 5 steps below:
Step 1. Connect adapter to K518ISE with mainline
Step 2. Connect K518ISE with 12V power supply
Step 3. Enter into “Setting”
Step 4. Click “Bind adapter”
Step 5. Click “OK” to complete
Original:How to update Lonsdor K518ise KPROG2 adapter kernel

 Original:How to update Lonsdor K518ise KPROG2 adapter kernel

没有评论:

发表评论